Archive for the ‘Code’ Category.

When I go to WordCamps, I get this question a lot: “Why do you have the PHP Code Widget still in the directory?”

There’s a good answer for that, but first let me explain why I made the thing in the first place.

If you examine the history of that plugin, you’ll find that it was submitted almost 10 years ago. Back then, widgets were new. Most people using WordPress had hardcoded sidebars in their themes. Changing the sidebar meant changing the theme. Widgets aimed to replace that with draggable objects. The Widget plugin was still a plugin, and not in core, but headed there.

The PHP Code Widget was created to make it easy and simple and fast to migrate from a hardcoded sidebar to a widget based one. You could take your existing code in the sidebar file, paste it into the widget, and then you had a movable widget that you could easily use.

Obviously, this was not meant for long term usage. The goal was to get widget support rapidly in your theme, with the expectation that as new widgets came out, you could replace your old code with newer, shinier, well supported, widgets.

The reason the plugin is still in the directory is because it still fills a need for some people. If I removed it, then they would fulfill that need in worse ways. It does not take much searching to find snippets of code, with bad advice saying to just pop it into your theme’s functions.php file, and voila, now all your Text Widgets run PHP code. That snippet actually exists. It’s a terrible idea, for obvious reasons.

The PHP Code Widget is less terrible than the alternatives.

But it’s still terrible.

And yes, it bothers me that it is one of the top 150 plugins. Storing PHP code in your database and then running it is just dumb. Don’t do that. Code should live in the right place, and that place is not the database.

So, in an effort to reduce the usage of the PHP Code Widget, here’s one way to stop using it, if you still are.

Getting rid of the PHP Code Widget

Step 1:

Get the PHP Code that you are using from the Widget, copy it into a text editor, save it somewhere for safe keeping.

Step 2:

You’re going to make a new plugin. You can call it whatever you like, but I recommend naming it specific to the site you’re making it for. If I was making a plugin for this site to hold widgets, then I’d call it “Ottopress Widgets” or something to that effect.

How to make a new plugin:

(Note: You can use Pluginception for this instead, if you like. That one I’m not ashamed of, it’s a very handy tool.)

a. Make a directory in /wp-content/plugins named after your plugin, like /wp-content/plugins/ottopress-widgets

b. Make a PHP file in there named the same. Like ottopress-widgets.php.

c. Edit that file, and add this header to the top of it:

<?php
/* Plugin Name: Ottopress Widgets*/

Lovely. We’ve made a new plugin. It doesn’t do anything, yet, but here’s some more code to add to the plugin. This is largely copy-paste, and then you edit it to fit your specific circumstances

Step 3:

add_action( 'widgets_init', 'ottopress_widget_register' );
function ottopress_widget_register() {
	register_widget( 'Ottopress_Widget' );
}
class Ottopress_Widget extends WP_Widget {
	function __construct() {

		$class = 'widget_ottopress';
		$name = 'Ottopress Widget';

		$widget_ops = array('classname' => $class, 'description' => $name);
		$control_ops = array('width' => 400, 'height' => 350);
		parent::__construct('', $name, $widget_ops, $control_ops);
	}

	function widget( $args, $instance ) {
		extract($args);
		echo $before_widget;

		echo '<h2 class="widget-title">Ottopress Widget</h2>';
		echo "<div>Here's my custom stuff.</div>";

		echo $after_widget;
	}
}

I named this widget “Ottopress Widget” by way of example. In the first few lines of code, you’ll want to change these to your own naming scheme. It’s important that names be unique, which is why I recommend naming things using your site’s name. Unlikely for there to be interference that way.

The $class and $name variables you should also change. The class is used in the HTML that the widget produces, so you can refer to it via CSS. The name is simply used for display purposes on the widgets editing screens.

Step 4:

Finally, the meat of the code you want to edit is here. I’ll point it out specifically.

function widget( $args, $instance ) {
	extract($args);
	echo $before_widget;

	echo '<h2 class="widget-title">Ottopress Widget</h2>';
	echo "<div>Here's my custom stuff.</div>";

	echo $after_widget;
}

This is the code that shows the widget on your site itself. Now, this one is just hardcoded to show the normal before and after code (these are set by the theme, so these should always be there), and then it has a little hardcoded bit there where it echo’s out a title and a div that says “Here’s my Custom Stuff”.

If you’re migrating from the PHP code widget, well, here’s where you migrate it to. You can drop your code from the PHP Code widget here and, you know, do whatever you were doing in the widget before, just now in an actual custom widget, in your own custom plugin. No more storing the code in the database. Just activate the plugin and replace the PHP Code widget with this one.

If you need more widgets because you were using it in multiple places, then simply repeat the process. Paste that whole class in there, only give it a different class name and other info, then put in your other code. You can have as many widgets as you like, they just have to all be named differently. Simple.

Note that this widget has no settings screen of any kind. Why would it? You’re controlling the code directly, no need for settings, presumably. If you want to go on and make your widget smarter and more complex and have settings, well, there’s other tutorials for that.

If this reduces the usage of the PHP Code Widget, well, I’ll be a happier person.

Shortlink:

Been a while since I wrote something. Let’s talk about some of the new stuff available in the Customizer.

Forget about some of part two

First, back in part two, I had a bit about Surfacing the Customizer. That bit is outdated now, WordPress does this for you in later versions. So, yeah, skip that.

Shiny new thing: Panels

Okay, so Panels aren’t that new. They were added in WordPress 4.0. Basically, they’re sliding containers for sections. Having trouble fitting all your settings on the screen? Group the various sections up into Panels. Panels show up as an item in the main list, and when you click the arrow next to them, the whole list glides off screen to show only those sections.

So, now we have four things: Panels, Sections, Controls, and Settings.

  • Panels group Sections together
  • Sections contain Controls
  • Controls are what the user changes
  • Settings define what the Controls change

Creating a panel is easy:

$wp_customize->add_panel( 'some_panel', array(
   'title' => 'Panel 1',
   'description' => 'This is a description of this panel',
   'priority' => 10,
) );

Adding a section to that panel is just as easy:

$wp_customize->add_section( 'themedemo_panel_settings', array(
 'title' => 'More Stuff',
 'priority' => 10,
 'panel' => 'some_panel',
) );

All that’s new is a panel setting to tell the section to go into that panel. Simple.

Active Callbacks

One of the problems with the Customizer was that it displayed settings and showed them changing on the site to your right, but the site being displayed is the actual site. Meaning that you can navigate on it. Sometimes, the controls being shown don’t necessarily apply to the actual site that you’re seeing.

Example: If you have a control to change the color of something in the sidebar, but then are looking at a page which has no sidebar, then you have no visual feedback to tell you what the change looks like.

To fix this, “active callbacks” are used.

The active_callback is simply a new parameter that you can pass into Panels, Sections, or Controls. It can contain the name of a function, and that function will be called when the page changes. The function should return true or false (or equivalent) to indicate whether or not the element of the customizer should be shown for that page.

So, if you have a whole Panel that only make sense when the user is looking at Front Page of the site (and not an individual post), then you can do this:

$wp_customize->add_panel( 'front_page_panel', array(
   'title' => 'Front Page Stuff',
   'description' => 'Stuff that you can change about the Front Page',
   'priority' => 10,
   'active_callback' => 'is_front_page',
) );

And voila, when the user is not looking at the front page, the panel simply disappears.

You can use any of the normal WordPress Template Tags for this, or write your own function if you want to be more specific about it.

Edit: As pointed out in the comments, this will not work with ALL of the Template Tags. In particular, is_single won’t work because of the optional parameter it can take. You can define a wrapper for these methods instead, to get the same effect. Example:

function callback_single() { return is_single(); }
...
   'active_callback'=>'callback_single'
...

Fun with Active Callbacks

If you do need to write your own callback function, note that the function receives the object in question when it’s called. So, if you attach an active_callback to a Panel, your function will get a argument of the WP_Customize_Panel object in question passed to it. Sections get WP_Customize_Section and such. You can use the information in these to decide whether the panel (or whatever) should be shown for that page.

So, how do we use that object? Well, you can use this to make whether certain controls show or not dependent on the values of other settings. All the various items you can use this on have a link back to the main WP_Customize_Manager. That class has a get_setting function, which you can use to determine what to do.

So, let’s make a control that causes other controls to appear, dependent on a setting.

First, let’s make a simple radio selection control:

$wp_customize->add_setting( 'demo_radio_control', array(
   'default'        => 'a',
) );

$wp_customize->add_control( 'demo_radio_control', array(
   'label'      => 'radio_control',
   'section'    => 'themedemo_panel_settings',
   'settings'   => 'demo_radio_control',
   'type'       => 'radio',
   'choices'    => array(
   'a' => 'Choice A',
   'b' => 'Choice B',
   ),
) );

Now, we need to make two other controls, one for each choice. You can actually make as many as you like, we’ll keep it simple.

First, the control for choice A. Let’s make it a simple text control.

$wp_customize->add_setting( 'choice_a_text', array(
   'default' => '',
) );

$wp_customize->add_control( 'choice_a_text', array(
   'label'      => 'Choice A: ',
   'section'    => 'themedemo_panel_settings',
   'type'       => 'text',
   'active_callback' => 'choice_a_callback',
) );

We’ll need that callback function to detect if choice A is selected in the radio control, and return true if it is, and false otherwise. Like so:

function choice_a_callback( $control ) {
   if ( $control->manager->get_setting('demo_radio_control')->value() == 'a' ) {
      return true;
   } else {
      return false;
   }
}

You can simplify that if you like, I spelled it out with an if statement so as to be clear as to what is happening.

panel1

Now for choice B, let’s make it display a color control instead:

$wp_customize->add_setting( 'choice_b_color', array(
   'default' => '#123456',
) );

$wp_customize->add_control( new WP_Customize_Color_Control( $wp_customize, 'choice_b_color', array(
   'label'   => 'Choice B',
   'section' => 'themedemo_panel_settings',
   'settings'   => 'choice_b_color',
   'active_callback' => 'choice_b_callback',
) ) );

And its callback:

function choice_b_callback( $control ) {
   if ( $control->manager->get_setting('demo_radio_control')->value() == 'b' ) {
      return true;
   } else {
      return false;
   }
}
panel1-b

Now, note that the callbacks are very similar. Seems like repeated code, doesn’t it? Well, it is, but remember that the $control here is the whole WP_Customize_Control object. We can use the same callback and simply check which control is calling it here instead.

function choice_callback( $control ) {
   $radio_setting = $control->manager->get_setting('demo_radio_control')->value();
   $control_id = $control->id;

   if ( $control_id == 'choice_a_text'  && $radio_setting == 'a' ) return true;
   if ( $control_id == 'choice_b_color' && $radio_setting == 'b' ) return true;

   return false;
}

So, instead of using two different callbacks, we just point our controls to this callback, which figures out what should show up for which setting. I’m sure you can simplify this further, depending on your particular needs.

One more thing: Customizing the Customizer

Not everybody likes the style of the Customizer. Maybe it clashes with your theme. Maybe you just want to tweak it a bit. Maybe you dislike that gray background color, and a more soothing blue would go better for your theme.

add_action( 'customize_controls_enqueue_scripts', 'themedemo_customizer_style');
function themedemo_customizer_style() {
   wp_add_inline_style( 'customize-controls', '.wp-full-overlay-sidebar { background: #abcdef }');
}

Or maybe you don’t think the Customizer area is wide enough… be careful with this one though, consider mobile users as well.

add_action( 'customize_controls_enqueue_scripts', 'themedemo_customizer_style');
function themedemo_customizer_style() {
   wp_add_inline_style( 'customize-controls', '.wp-full-overlay-sidebar { width: 400px } .wp-full-overlay.expanded { margin-left: 400px } ');
}

You can enqueue whole extra CSS files instead, if you like. Or, if you have special needs for javascript in some of your controls, and there’s libraries necessary to implement them, then you can enqueue those libraries here as well.

Shortlink:

One of the easier to understand vulnerabilities is the CSRF. It’s also one of the most common issues we see in plugins and themes, because people rarely think about it.

Imagine that I have a form that takes input, like so:

<form action="http://example.com/example.php" method="GET">
<input type="text" name="demo" />
</form>

Now, that’s a simple form (and missing a submit button to boot), but you get the idea. It takes a text input. Presumably, something on the other end (at /example.php) processes that input, saves it in a database, something like that. Easy.

First question: Is this necessary?

The main question I see asked when this concept is explained to people is “why is this necessary?”. Some people believe that since you have to be logged in to access admin screens in the first place, then you can’t get to the forms and submit them. Why have all this protection and checking for a form submission when the form is hidden behind a login screen?

What you need to understand is the difference between “authority” and “intent“.

Authority

In real world cases where we are processing that input, we generally want to limit who is allowed to submit that form in some way. A plugin will want to only allow admins to change settings. A theme will only want to allow site owners to adjust the display of the site. Things of that nature. For these cases, we use methods of authentication.

There’s several ways to do this, we can check the current_user information. WordPress has capability checks for users to know what they are and are not allowed to do. When we check these, we’re verifying authority. Making sure that the user is allowed to do these things.

But something else that we need to check which most people don’t think about is intent. Did the user actually intend to submit that form, or did their browser submit it for them automatically, perhaps without their knowledge?

Examine that form again, and consider what would happen if you were to visit a webpage, anywhere on the internet, that contains this:

<img src="http://example.com/example.php?demo=pwned" />

Now, you might be thinking that this is a rather contrived example, and you’d be right on that score, but it serves to demonstrate the point. Your browser loads this URL and that is the equivalent action to submitting that form, with “pwned” as the text in question.

Here’s the kicker, all those authority checks do us no good in preventing this. You actually do have the authority to submit that form, and your browser, using your authority, just submitted it for you. Pwned, indeed.

(For those of you thinking “just use POST forms”, consider that javascript can submit POST forms. So that’s really no help.)

Intent

What we need is to verify intent. We need to know that the user submitted that form, and not just the browser doing it for them automatically.

WordPress used to do this (a looong time ago) using the referer. For those who don’t know, referer is a URL passed by your browser to indicate where a user came from. So one could check that the referer says that the form was submitted from the form’s page and not from some other page on the internet. The problem is that referer is not reliable. Some browsers have the ability for script to fake the referer. Firewalls and proxies often strip the referer out, for privacy concerns. And so forth.

Nonces

WordPress now does this using nonces. A nonce is a “number used once” in its purest form. Basically, it’s a one-time password. When we generate the form, we generate a number. When the form is submitted, we check the number. If the number is wrong or missing, we don’t allow the form to be submitted. A script cannot know the number in advance. Other sites cannot guess the number.

Now, technically, WordPress doesn’t use real nonces, because they’re not “used once”. Instead, WordPress nonces revolve on a 12 hour rotating system (where 24 hours are accepted). For any given 12 hour period, the nonce number for a given action will be the same. But it’s close enough to a real nonce to eliminate the issue, but notably it’s only for the issue of verifying intent. Don’t try to use WordPress nonces for anything else. 🙂

So, when we generate a form, we generate a nonce. This nonce is based on five things: site, user, time, the action being performed, and the object that the action is being performed on. Changing any of these gives us a different nonce.

Let’s say I want to delete a post. To do that, I need to know the nonce for deleting that specific post, as me, on my site, within the last 24 hours. Without that nonce, I cannot perform the action. More importantly, in order for somebody to “trick” my browser into doing it for me, they need to get that specific nonce and get my browser to load it within 24 hours. Tough to do. And even if they pull it off, they only have been able to perform that very specific action, the nonce obtained is useless for any other purpose. They don’t get any form of full control via this manner. They can’t make my browser do anything on mysite that they don’t have the nonce for.

Using nonces

So, let’s get down to brass tacks. Generating a nonce in WordPress is easy and can be done in many different ways depending on your particular needs. You might want to protect a simple link, or you might want to protect a form, or you might even need to protect a javascript ajax call.

Protecting a link can be done with wp_nonce_url(). It takes a URL and an action and adds a valid nonce onto that URL. It works like this:

$nonced_url = wp_nonce_url( $url, 'action_'.$object_id );

Here, we’re taking some URL, and adding a nonce onto it for a specific action on some specific object. This is important, actions and objects need to both be specified if there is some object being referred to. An example might be a link to delete a specific post. Such code would look like this:

wp_nonce_url( $url, 'trash-post_'.$post->ID )

The action is “trash-post” and the post being trashed has its ID number appended to that action. Thus, the nonce will let you trash that post and only that post.

On the other hand, maybe we have a form that we need to protect instead. Inside that form, we can add something like this:

wp_nonce_field( 'delete-comment_'.$comment_id );

This is the nonce for deleting a comment. It outputs a couple of form fields, like so:

<input type="hidden" id="_wpnonce" name="_wpnonce" value="1234567890" />
<input type="hidden" name="_wp_http_referer" value="/wp-admin/edit-comments.php" />

The value for the nonce will be specific to deleting that comment, on that site, by that user.

Sometimes we just need to generate the nonce directly, in no specific format. One case might be for an AJAX type call, where the data is being submitted by jQuery. In such a case, you can use the wp_create_nonce function to get just that nonce value, like so:

wp_create_nonce( 'action_'.$object_id );

For AJAX requests, you’ll want to include that nonce value in the submitted data with a name of “_ajax_nonce”. Why that particular name? Because it’s what WordPress checks when verifying the nonce. Speaking of verification:

Verifying nonces

Generating these numbers is no good if you don’t check them as well. Fortunately, WordPress makes this easy. There’s two functions to verify incoming nonces.

check_admin_referer( 'action_'.$object_id );

The name of the function refers back to the time before nonces, when this function call was checking the referer value from the browser. Nowadays, it checks nonces instead. If the _wpnonce sent back in the form does not match the action and ID here, then this function stops further processing. This is the cause of the “Are you sure you want to do this?” screen that is sometimes reported by users. To avoid getting this screen, the nonce being checked has to match.

An alternative to checking forms or links is checking ajax requests, which is why we have this function:

check_ajax_referer( 'action_'.$object_id );

This performs the same basic check, but if it fails, it returns a simple “-1” response and then halts processing. Your AJAX javascript code can recognise that response and take appropriate action based on it.

In either case, if the nonce fails, the script exits. No action is taken. The form is not processed, the post not deleted. That’s the sort of check you need to prevent CSRF attacks.

Bottom Line

If you have a plugin or a theme or any type of code that “does something” in WordPress, then you need to protect that action with a nonce. If you’re not protecting it with a nonce, then it’s possible for somebody else to trick your browser into performing that action on your behalf.

Also, note that it’s not enough to just name the action. You generally are taking action on some specific “thing”, and the ID of that thing needs to be included in your nonce as well. The more specific the action, the better.

Any form, any action, no matter how much “authentication” you have on checking it, can be exploited, because you’re not really authenticating the “user”, you’re authenticating that it’s coming from “the user’s browser”. You need to have something else that changes regularly, so that you can verify that the user did indeed load that particular form and submit it relatively recently, and thus probably intended to perform that action.

Nonces are easy to implement. So do it already. We have enough plugins not doing it that this clearly needs to be said. 🙂

Shortlink:

We get a lot of submissions to the WordPress.org plugin repository, and so there is often a lot of dangerous code submitted. Usually this isn’t malicious, it’s just by people who honestly don’t know that their code has problems. Understanding those problems is the first step to fixing them.

So here’s one common vulnerability we see in code submissions a lot: SQL Injection

To understand SQL Injection, let’s quote Wikipedia for a moment:

SQL injection is a code injection technique, used to attack data driven applications, in which malicious SQL statements are inserted into an entry field for execution

Here’s a piece of code made for WordPress, which is querying the database for a post:

// bad code, do not use
$results = $wpdb->get_results( "SELECT * FROM $wpdb->posts WHERE ID = $id" );

If you don’t see the problem with this code right away, then you should continue reading this post.

(Yes, this article shows the basics of the prepare() function. If you already know about the prepare() function, you might be shocked at the number of people who do not.)

Continue reading ‘Better Know a Vulnerability: SQL Injection’ »

Shortlink:

Olanguagesne of the new features alongside the auto-update feature in WordPress 3.7 is support for “language packs”. More info about these will be coming out eventually, along with new tools for plugin and theme authors to use to manage this system (or to not have to micro-manage it, rather). A lot of this feature is yet to be implemented on WordPress.org, but the core support for it is in WordPress 3.7.

In order to use it most effectively, there’s a few ground rules that you, as a plugin or theme author, need to follow. Fortunately, they’re pretty simple.

Text-domains = the plugin/theme slug

Firstly, for language packs to work, your text-domain must be identical to the plugin or theme’s slug.

What’s a “slug”? Good question. If you examine the URL of your plugin or theme on WordPress.org, you’ll find that it looks like this:

http://wordpress.org/plugins/some-text-here

or

http://wordpress.org/themes/some-text-here

That “some-text-here” part is the slug. It cannot be changed by the plugin or theme author once the entry is created for it in the WordPress.org directory. It is a unique item to plugins/themes, and that’s how WordPress.org will be managing and naming the language files.

Therefore, your “text-domain” must be the same as that slug. In all your translation function calls, the text-domain must be there, it must be a plain string, and it must be identical to the slug of your plugin or theme on WordPress.org.

Headers

For translation to be most effective for your plugin/theme, you need to include a header in it that you may not be including:

Text Domain: put-the-slug-here

This “Text Domain” header is read and used to load your language pack files even when your plugin is not activated. This allows the headers of the plugin (like the description and such) to be translated properly when the plugin is displayed on the Plugins/Themes screen. So your international users will be able to read that text too, before ever using the code.

If you want to include your own translation files instead of using the language pack system, then this still works. The core code will look for the relevant *.mo translation files in the plugin’s directory. If you use a subdirectory, like “/languages”, then you can use a header like the following:

Domain Path: /languages

Note that the Domain Path for plugins defaults to the plugin’s own root directory, but the Domain Path for themes defaults to “/languages” to begin with. If the default works for you, then you do not need to have this header at all.

Also note that if a language file is not found for a particular configuration, then WordPress 3.7 will fall back to using the language pack system to attempt to find it. So if you only include, say, 3 languages, and there are language packs for 4 more, then those 4 more will still work.

Speaking of configuration,

Function calls: load_plugin_textdomain or load_theme_textdomain

Here is how to properly call them, with the Headers you’ll need included for good measure:

If you want to allow for translation MO files in the plugin’s own directory:

Text Domain: plugin-slug
load_plugin_textdomain( 'plugin-slug', false, dirname( plugin_basename( __FILE__ ) ) );

If you want to allow for translation MO files in the plugin’s languages subdirectory:

Text Domain: plugin-slug
Domain Path: /languages
load_plugin_textdomain( 'plugin-slug', false, dirname( plugin_basename( __FILE__ ) ) . '/languages/' );

If you want to use language packs exclusively (note: WP will still check the base /wp-content/plugins directory for language files, just in case):

Text Domain: plugin-slug
load_plugin_textdomain( 'plugin-slug' );

If you want to allow for translation MO files in the theme’s languages subdirectory:

Text Domain: theme-slug
load_theme_textdomain( 'theme-slug', get_template_directory() . '/languages' );

If you want to allow for translation MO files in the theme’s “lang” directory:

Text Domain: theme-slug
Domain Path: /lang
load_theme_textdomain( 'theme-slug', get_template_directory() . '/lang' );

If you want to use language packs exclusively (note: WP will still check the theme’s own directory for language files, just in case):

Text Domain: theme-slug
load_theme_textdomain( 'theme-slug' );

Important:

  • Any calls to load_plugin_textdomain should be in a function attached to the “plugins_loaded” action hook.
  • Any calls to load_theme_textdomain should be in a function attached to the “after_setup_theme” action hook.

How it will work

Eventually, WordPress.org will have a way to allow plugin/theme authors to upload translation files. Or, it will have a way to allow users to submit their translations to them via translate.wordpress.org… Regardless, the relevant MO files will be made on some basis, and the files will be made available to WordPress users through the normal plugin/theme update process. The auto-update system will automatically download these MO files into the /wp-content/languages directory. There will be plugins and themes subdirectories under that to hold these files.

The files will be named “slug-locale.mo”, where slug is the plugin or theme’s slug, and the locale is the relevant locale information about the language (like “en_US” for example). When load_plugin/theme_textdomain is called, WordPress will look in the specified place for the relevant MO file, and if it does not find it, then it falls back to looking in the /wp-content/languages folder for it, on that named basis. If it finds it, it loads it up and uses it.

This gives the plugin or theme authors the ability to continue to manage their translations themselves, as they’ve always done, or use the new language pack system and let WordPress.org manage it for you. The language pack system has a number of advantages:

  • Users only download the languages they actually need, instead of all of them. Your plugin is smaller, the download is faster.
  • New translations can be approved and pushed as updates independently of the plugin or theme. No more need to bump the version just to get new translations to users.
  • Translations can be handled much easier, or ignored by the author entirely. Communities can (eventually) do their own translations through translate.wordpress.org.

Things like that. These all rely on plugins and themes doing translations a certain and specific way, along with properly internationalizing their code for translation.

Obviously, any code not doing this sort of thing won’t get these benefits. Well, we can’t fix everything at once. But hopefully, the most common and popular ones will do this (or already are), and they can be integrated into the system quickly and easily.

Some tools to help

If you’re a plugin or theme author, do yourself a favor and use your SVN client to get a copy of this repository:

http://develop.svn.wordpress.org/trunk/

This is the core develop repository for WordPress. It comes with the WordPress trunk code (in /src) but it also has some important tools you’ll need in the /tools/i18n directory. Note that to use these tools, you need the *entire* checkout, not just the tools. The tools make calls back into the WordPress core code to do some of the work, so the whole /trunk directory needs to be available there.

Also, those tools are managed by the core team. So keep them to date by doing an svn update every once in a while too.

Here’s one of those tools: makepot.php

And here’s how you run it:

> php makepot.php wp-plugin /path/to/my/plugin-dir plugin-slug.pot

This will scan your plugin’s directory and create a POT file for you to give to translators or include with your plugin. Theme authors, same deal, just replace “wp-plugin” with “wp-theme”.

Here’s another tool: add-textdomain.php

It will read in a file and add a proper text-domain to all translation function calls it finds. To use it, you can do this:

> php add-textdomain.php plugin-slug /path/to/a/file.php > newfile.php

The newfile.php will be identical, but all the translation calls will be fixed up and have the plugin-slug in there as intended.

The tool outputs the new file on standard output, which I redirected into “newfile.php” as you can see above. This is so that it is non-destructive by default. If you’re confident, and have backups of the files just in case, you can use it in-place like so:

> php add-textdomain -i plugin-slug /path/to/a/file.php

The original file will be replaced with the modified version. Use this at your own risk. I’m paranoid, I prefer to make a new file for manual comparison. 😉

This tool will go through and add the text-domain to any calls where you might have left it off. I have done this many times. Force of habit, or I just forget to do it, etc.

More Info

And if you’re having a hard time with making your text translatable in the code, I have a couple other posts on that topic as well. See them too.

So go forth, plugin and theme authors. Start fixing up that code. Many of you may have nothing to fix. Some of you may just need a header change. But it’s worth giving it a once over anyway. It certainly would be very nice if, as the new features begin to be added to WordPress.org, then your code was all ready and set to take immediate advantage of it, wouldn’t it? 🙂

Shortlink:

You know, when some people are asked to do a presentation on a subject, they start by thinking about what they’re going to say, how they’re going to say it, and what their presentation will contain.

Me, I just start writing code.

I was asked to present at WordCamp Seattle, on the specific subject of the GPL. Talking about licenses is pretty dry stuff, so I came up with some ideas and such and put them down and built a presentation. No problem. But naturally, I wanted to use WordPress to present it.

I’ve tried this sort of presentation-theme idea a couple years back, and didn’t really get anywhere good. HTML wasn’t up to the task at the time, not really. But in my searching for this again, I ran across the Google IO 2012 slides template.

It’s a neat template. Does some very cool stuff. HTML5, CSS3, clever Javascripty goodness. Bit annoying to adjust though, and very hardcoded. So, I turned it into a WordPress theme instead.

I call it “Slides”, because I’m bad at naming things.

If you want to skip straight to the download, you’ll find it at the bottom of the post, but I encourage you to read first, because if you just install it on an existing WordPress install, you’ll find your site to be instantly broken.

Continue reading ‘Slides: A Presentation Theme’ »

Shortlink:

blue
I’m not a fan of the color orange. Dunno why. I prefer soothing and relaxing colors, like blues and greens.

But the new Twenty Thirteen theme for the next version of WordPress is very, very orange.

Since I like to run the default themes over on my other site, this clearly could not stand.

So, I did a palette swap. Basically, I took the three header images, and swapped the Red and Blue channels, leaving the Green channel alone. Easy enough to do in Photoshop.

Then, I made a child theme, and put some minimalist code in the functions.php file to fiddle with the default header images to use the ones from my child theme instead of the normal ones. Finally, I did a search and replace for all the color references in the style.css file, swapped the R and B values in them, then put them in my new style.css file.

The result you can see over on my other blog. Yes, I know I don’t write often enough. Hell, I’ve been busy.

Child themes are fun to mess with. Here’s a copy if you want it for anything.

Twenty Thirteen – Blue

Enjoy! 🙂

Shortlink:

Infinite Scroll
Everybody seems to be talking about Photon. Nobody really seemed to notice the Infinite Scroll feature added to the latest Jetpack. While it is slightly buggy, it’s pretty neat nevertheless. It’s also pretty easy to add support for in your own themes. I added it to this blog, just to see how. 🙂

So, here’s how you do it.

Step 1: Use Template Parts

Look at the HTML produced by your main Loop. The main one being the one that displays the main set of posts. This is usually in the index.php file.

Let’s say that HTML looks like this (overly simplified, of course):

<div id="content">
	<div class="post">...</div>
	<div class="post">...</div>
	<div class="post">...</div>
</div>

Each one of those posts is produced inside the loop, while the content container is outside it. Now let’s look at a simplified version of what The Loop might look like in PHP:

<?php while (have_posts()) : the_post(); ?>
        <div id="post-<?php the_ID(); ?>" <?php post_class(); ?>>
... all the post creation stuff here ...
        </div>
<?php endwhile; ?>

What we need to do is to separate that “post” from the Loop itself, in a way that the Infinite Scroll code can then produce the post independently. With Template Parts, this is actually rather easy. We just cut and paste all that post-producing code, and put it in a new “content.php” file. Then we change the Loop into this:

<?php 
while (have_posts()) : the_post();
	get_template_part( 'content', get_post_format() ); 
endwhile; 
?>

The get_template_part function will load that content.php file for us and include it there.

See a template is a file listed in the Template Hierarchy. But a template part is a file that contains only part of a template, and you can name them yourself. In this case, we named it “content”. It will become, therefore, content.php in the theme.

We also created a mini-hierarchy for ourselves while we were at it, using the Post Formats. What this means is that if I want to display, say, the “quote” format posts differently, I can copy content.php to content-quote.php, and make my changes in there. Then quotes will be displayed however I like in that new template part. And if content-quote.php doesn’t exist, then it falls back to using content.php, just like the normal fallbacks.

By separating out the Post from the surrounding loop that it’s in, then each post can be generated independently, sent over the wire via Javascript, and inserted into the page. Thus, Infinite Scroll can do the job.

Step 2: Enable Infinite Scroll

A theme can declare support for infinite scroll using add_theme_support(), like so:

add_theme_support( 'infinite-scroll', array(
	'container'    => 'content',
) );

The “container” is the ID of the element in the page that was our wrapper class. Let’s go back to that HTML again:

<div id="content">
	<div class="post">...</div>
	<div class="post">...</div>
	<div class="post">...</div>
</div>

See how the “id=content” is the big wrapper for our posts? Well, we tell the Infinite Scroll code that, it then uses it in the Javascript to know where to append the new posts to. Easy.

Step 3: Finishing touches

Simply speaking, that’s all there really is to it. But, there’s additional ways to customize it for your particular theme, to look better. Each of these is an option you can add to that add_theme_support call. Let’s go over them briefly:

Footer: You may have noticed when you enabled this and test it that you now have a sort of white footer overlay at the bottom of the page. This provides the page with a footer space that scrolls with the page, giving it a sort of finished look. Some people may like it, some not so much. We can use the footer option to adjust it.

First, using ‘footer’=>false will simply turn it off.

Alternatively, giving it the ID of some other element on the page will make it match that element’s width. For example, if you have HTML that looks like this:

<div id="page">
	<div id="content">
		<div class="post">...</div>
	</div>
	<div id="sidebar">
		<div>...</div>
	</div>
</div>

..then using ‘footer’=>’page’ would make it match the width of the “page” element, so as to be the proper width across the screen to fit better with the page.

Type: Infinite Scroll supports two methods of loading new posts. One method is called ‘scroll’, where new posts are loaded as the user reaches the bottom of the page. When they scroll, essentially. The other is called ‘click’, which adds in a new button towards the bottom of the posts, and when you click it, it loads more posts. You can force one type or the other using the ‘type’ option.

Footer Widgets: Some themes support having widget spaces in the footer. This has become fairly commonplace after Twenty Ten did it. Well, if you’re using the scroll type, then the widgets won’t be seen for a while on some blogs, since it will just load in more posts and keep pushing that footer further down. You could set the type to click to allow the footer to actually be seen.

The ‘footer_widgets’ option lets you specify a widget space that you registered with register_sidebar(). It will check that space to see if there’s any widgets in it. If there are, then it will automatically set type to “click” so that those widgets can be seen. If not, then it will let the type stay as “scroll”. Thus, it can choose the type intelligently, depending on whether widgets exist in the footer or not.

Wrapper: If you have some complex HTML for your posts, then you can give the ‘wrapper’ option a classname to use. It will wrap the returned posts in a div with that custom classname for you. This also allows you a way to perform styling tricks on those just-loaded posts.

Render: The ‘render’ option gives you an alternative to making a content template part. You can give this a function name, and that function will be called to render the posts instead. If you’re writing a theme, I suggest using the content template part instead. It’s easier and way more flexible.

Posts per page: By default, the Infinite Scroll module makes the page show 7 posts only, then more load when you scroll down (for the ‘scroll’ type). This is smaller than most people’s settings (default of which is 10), but it doesn’t matter since the whole point is to make it load new posts when you scroll down to them. If you happen to need a different number, you can use the ‘posts_per_page’ option to change the number.

There’s also a few things you can do with CSS.

When infinite scrolling is enabled, then body_class (which you should have been using in the body tag anyway) will get the “infinite-scroll” class added to it. If the type setting is ‘scroll’ instead of ‘click’, then the class “neverending” will be there too. Also, once the user gets to the last post, the javascript code adds an “infinity-end” class to the body, meaning that you can style what happens when the user gets to the end. Jetpack’s documentation page suggests hiding the normal footer until the user actually reaches it, using CSS like this:

/* Hides navigation links and site footer when infinite scroll is active */
.infinite-scroll #navigation,
.infinite-scroll.neverending #footer {
	display: none;
}
/* Shows the footer again in case all posts have been loaded */
.infinity-end.neverending #footer {
	display: block;
}

But obviously you can use it for more than just this functionality; because it’s on the body, the classes can be used to adjust anything on the page, and make them different with the infinite scroll than without it.

You can also style the “span.infinite-loader”. This is the spinning handle thing that shows up at the bottom of posts, before the new ones load in. Honestly, the loading is pretty quick and the default style looks pretty good to me. You can adjust the style of it if you like, perhaps to make it more centered on the container.

The div#infinite-handle will be the box that shows up to load more posts, if the type is set to “click”. You can use this to reposition the box, make it wider, change the color, etc.

Finally, if you are doing anything extremely tricky with Javascript, loading in new posts may be not handled precisely well by your existing code. The official support page methods a post-load event fired on document.body that occurs when the posts are loaded. You should refer to that documentation for more info on it, if needed.

Summary

On the whole, it’s a clever module to add to Jetpack. It still has some problems with specific sorts of content (some videos display very wonky sometimes), but I’m sure they’ll have that sorted out before too long. Adding support for it in your theme might also get you thinking about Template Parts and how to use them, and that’s definitely a good thing to be doing.

Shortlink:


So in my last post about Internationalization, I covered some non-obvious things that you should consider when adding translation capabilities to your code.

Today, let’s add to that by covering some non-obvious translation functions. You’re probably not using these, since they don’t get talked about as much. But there’s probably places where you should be using them, so knowing about them is the first step. And knowing is half the battle.

Basic functions, again

Last time I talked about these functions:

  • __()
  • _e()
  • _x()
  • _ex()
  • _n()

Let’s cover the ones I didn’t talk about.

Escaping output

In practice, you tend to use these mostly when outputting things onto the main page or in the admin. But, one thing you also use a lot when outputting text is the standard escaping functions. These are things like esc_html(), which outputs text in a way that makes it “safe” to go onto a webpage, without being interpreted as HTML. If the text comes from user input, then this is a good idea.

Now, if you think about it, then the text you have may be translated in some other file, which you don’t control either. So escaping that text might be a good idea too. If somebody snuck bad code into a translation file, a user might get bad things displayed without being able to easily find it.

So you could write something like echo esc_html(__('text','text-domain')), but that’s a bit wordy. Let’s talk about some shortcuts.

The esc_html__() function is the equivalent of esc_html(__(...)). It does the escaped html and the double-underscore translation all in one go. Similarly, the esc_html_e() function does the same thing, but it echoes the result, just like the _e() function would. And there’s also esc_html_x(), which is the equivalent of combining esc_html() and _x().

Along with those three are the three identical equivalents for attributes: esc_attr__(), esc_attr_e(), and esc_attr_x(). As the name implies, these combine the translation functions with esc_attr(), which is the escape function specifically intended when you’re outputting text into html attributes.

Also note there’s no shortcut for the equivalent of _ex(). It’s just not used that much, or at least not enough to need something special for it. Use an echo esc_html_x() instead.

There are no shortcuts for the other escaping functions as yet, but these can save a few keystrokes and make your code that much more readable.

The Numerical No-op

So we’ve got some shortcuts for escaping with those three functions, but where’s the love for _n()?

One of the problems with _n() is that it tends to require the strings to be in the same place that the PHP variable is. For all the other functions, you could have a big file of strings in an array, and then reference those strings by name or something elsewhere because they don’t require any PHP variables. Nothing about them is computed at the time of the output.

But not so with _n(), that $number to decide which string to use means that the strings have to be right there, they can’t be translated separately and referenced.

This is where _n_noop() comes in. The _n_noop() function basically takes the singular and plural strings for something, along with the text domain, and stores them in an array so that they can be referenced later by a function named translate_nooped_plural().

Perhaps an example is in order. Let’s go back to the tacos:

$string = sprintf( _n('You have %d taco.', 'You have %d tacos.', $number, 'plugin-domain'), $number );

What if we wanted those strings somewhere else? Like in a big file with all of our strings. Here’s a way to separate the strings from the _n() call:

$taco_plural = _n_noop('You have %d taco.', 'You have %d tacos.', 'plugin-domain');
$string = sprintf( translate_nooped_plural( $taco_plural, $number) , $number );

Now, that $taco_plural can be defined anywhere. Note that it contains no references to PHP variables. It’s basically static and unchanging. This allows us to separate it, then reference it elsewhere for the actual translation. The translate_nooped_plural() function performs the same job as _n() does, choosing which string to use based on the $number of tacos. The sprintf then pushes the $number into the chosen string, replacing the %d with the number.

Thus, that lets us extract the translatable strings out and put them anywhere we choose.

Also of note: The _nx_noop() function is a cross between _n_noop() and _x(). It takes a context for the translators as the third argument, and the domain becomes the fourth argument. Useful if you need to explain to the translators the context surrounding the pluralization choice.

Numbers and Dates

The number_format_i18n() function is functionally equivalent to the PHP number_format function. It lets you format numbers with commas at the thousands mark and so forth, except that it also takes localization into account. Not everybody uses commas for thousands and periods for decimals. This function will do the translation appropriately for that aspect.

The date_i18n() function is functionally equivalent to the PHP date function. It will handle all the same string formatting parameters as date() will, but it will cause output to be translated for month names, day-of-week names, and so forth. Of note is that it doesn’t change the format requested. If some places put days before months, for example, it won’t handle that. But it will output the month name in the native language (if the translation pack has the right month name in it). So you may want to run the date formatting string through __() as well, to let translators adjust the date format accordingly.

Wrap up

And that’s pretty much all the rest of the translation functions that I didn’t cover before. I may have forgotten a few useful ones here or there. Feel free to comment about anything I missed, or what you see most often, especially if you’re doing translations yourself.

Shortlink:

Okay, a quick one today. Let’s make a custom control for the customizer.

Back in the first tutorial, I talked about the various controls available in the customizer. Specifically I mentioned image handling, color wheels, text boxes, radios, dropdowns, and checkboxes.

Let’s try a new one? How about a textarea? It’s not in the core code, but it’s easy enough to add one.

Create a Class

So first, we have to create our class. Now, where we create this class is important. Specifically, we have to create it in the function called by the customize_register action. You remember that, right? It started like this:

add_action( 'customize_register', 'themename_customize_register' );
function themename_customize_register($wp_customize) {
	// ... do stuff ...

The reason we have to create our class in here is because we need to make our new class extend the built in WP_Customize_Control class, and that class only gets loaded and defined when we’re actually using the customizer. An alternate means of doing this would be to wrap the class definition in an “if (class_exists(‘WP_Customize_Control’))” statement, if you prefer to not have your classes defined inside a function. Personal preference, I don’t think it makes a difference either way.

So, here’s our textarea control. All we’re doing is to override the render_content() function and make it display a textarea.

class Example_Customize_Textarea_Control extends WP_Customize_Control {
	public $type = 'textarea';

	public function render_content() {
		?>
		<label>
		<span class="customize-control-title"><?php echo esc_html( $this->label ); ?></span>
		<textarea rows="5" style="width:100%;" <?php $this->link(); ?>><?php echo esc_textarea( $this->value() ); ?></textarea>
		</label>
		<?php
	}
}

You can see how simple it is to do, really. We just output a span with the value from $this->label for the name displayed above the textarea, then output the textarea itself.

Note that the textarea has no “name” parameter. It doesn’t need one. The $this->link() function outputs the information for the customizer script. Specifically, it will create a “data-customizer-setting-link” attribute, to link the textarea to the proper setting it’s controlling.

Now, we just have to use the new control.

Add a setting and control

Let’s go back to the theme demo I used in the second customizer tutorial post, and add a new setting and control to demonstrate this:

$wp_customize->add_setting( 'textarea_setting', array(
	'default'        => 'Some default text for the textarea',
) );

$wp_customize->add_control( new Example_Customize_Textarea_Control( $wp_customize, 'textarea_setting', array(
	'label'   => 'Textarea Setting',
	'section' => 'themedemo_demo_settings',
	'settings'   => 'textarea_setting',
) ) );

Nothing complicated there. We create the setting, then we create our control, using the new class we made for this purpose earlier.

Use the setting in the theme

Now let’s add to that index.php file I made in the theme demo to show the results of our work.

echo 'textarea_setting => '.get_theme_mod( 'textarea_setting', 'default_value' )."\n";

And that’s pretty much that. We now have a textarea control, and changing/saving results in the setting changing as well.

You can extend this further to use postMessage for real-time changing of settings, if you like.

Custom controls using complex javascript and such can be done as well. Examine the core WP_Customize_Color_Control, which uses the farbtastic Javascript for the color wheel. That one has special JS in the customize-controls.dex.js file to handle receiving the input and passing it along to the customizer JS. Look for “api.ColorControl” and how it gets the setting from the HTML and sets it. I’m not a JS guru, that sort of thing is slightly outside my own scope. 🙂

Any ideas for other controls that themes might need? Leave a comment, maybe somebody has a solution.

Shortlink: